Amfanin manganese

Ana amfani da Manganese galibi a masana'antar ƙarfe da masana'antar sinadarai bayan an niƙa shi ya zama foda ta hanyar amfani daniƙa a tsaye na manganeseFoda ta Manganese tana da waɗannan aikace-aikace.

1. A fannin aikin ƙarfe

Manganese wani sinadari ne mai ƙarfi da ke rage yawan iskar oxygen, yana iya shan dukkan iskar oxygen daga ƙarfen da aka narke, yana barin ya zama wani abu mai laushi. Manganese kuma kyakkyawan sinadari ne na desulfurizer wanda zai iya cire dukkan sulfur daga ƙarfen da aka narke, ƙara ƙaramin adadin manganese a cikin ƙarfe na iya inganta halayen injiniya na ƙarfe sosai, gami da juriyar sassauƙa, sassauci, tauri da juriyar lalacewa.

① Dangane da aikin ƙarfe: ana iya narkar da ferromanganese na yau da kullun da ƙarfe mai inganci na manganese. Ferromanganese ƙarin kayan aiki ne don samar da ƙarfe na musamman, kuma ƙaramin adadin silicon manganese shi ma ana iya narkar da shi. Silicon manganese yana da amfani wajen narkar da wasu nau'ikan ƙarfe.

②A cikin masana'antar ƙarfe mara ƙarfe: ƙarfe na manganese da jan ƙarfe na iya yin ma'ajiyar ƙarfe mai hana tsatsa. Ana iya amfani da ƙarfe na tagulla na Manganese a matsayin kayan jigilar kaya. ƙarfe na aluminum na Manganese yana da amfani mai kyau a masana'antar jiragen sama. ƙarfe na Manganese-nickel-jan ƙarfe na iya yin wayoyi masu juriya na yau da kullun.

2. A cikin masana'antar sinadarai

Ana iya amfani da Manganese dioxide (pylurite) a matsayin wakili mara kyau wajen kera batura busassu, kuma ana iya amfani da shi a matsayin busar da fenti a masana'antar sinadarai. Haka kuma ana samunsa a cikin gilashin ado baƙi da kuma launukan tubali da gilashi na tukwane. Haka kuma ana iya yinsa a matsayin mahaɗan manganese daban-daban, kamar su manganese sulfate, manganese chloride, potassium permanganate, da sauransu.

Me yasa ya kamata a sarrafa manganese zuwa foda?;

Yi amfani da pyrolusite (babban bangaren shine MnO2) a matsayin kayan da aka sarrafa sannan a sarrafa shi zuwa ga daidaito tsakanin raga 100 zuwa 160 don shirya potassium permanganate. Tunda haɗin da ke tsakanin sinadaran ya fi cikakke, saurin amsawar yana da sauri kuma juyawar ta fi cikakke, don haka manufar murƙushe pyrolusite shine ƙara yankin hulɗar sinadaran, hanzarta saurin amsawar, da kuma canza sinadaran sosai.

Yadda ake sarrafa manganese zuwa foda?

Injin niƙa na Manganese a tsayeInjin niƙa na musamman ne na yin foda na ma'adinai don sarrafa manganese. Wannan injin niƙa na tsaye yana haɗa niƙa, niƙa, rarrabawa da tattara foda tare, wanda ke da babban ƙarfin samarwa da ingantaccen niƙa mai yawa.

Kamfanin Niƙa Na'urar HLM Tsaye

Girman barbashi da aka gama: 22-180μm

Ƙarfin samarwa: 5-700t/h

Sassan da suka dace: ana amfani da wannan injin niƙa a niƙa ma'adanai marasa ƙarfe tare da taurin Mohs ƙasa da 7 da kuma danshi a cikin 6%, ana amfani da wannan injin niƙa sosai a wutar lantarki, ƙarfe, siminti, masana'antar sinadarai, roba, fenti, tawada, abinci, magunguna da sauran wuraren samarwa.

Muna so mu ba ku shawarar mafi kyauniƙa a tsaye na manganese samfurin don tabbatar da cewa kun sami sakamakon niƙa da ake so. Da fatan za a gaya mana waɗannan tambayoyin:

1. Kayanka na asali.
2. Ƙanƙantar da ake buƙata (rami/μm).
3. Ƙarfin da ake buƙata (t/h).

Imel:hcmkt@hcmilling.com