HLMNa'urar Niƙa Karfe TsayeShuka

Injin niƙa mai tsayi na ƙarfe ana amfani da shi sosai a cikinlayin samar da slag na ƙarfeHLM Vertical Mill yana iya sarrafa fineness na 75-44μm, idan kuna buƙata masana'antar niƙa ƙarfe, please contact us for details, Email: hcmkt@hcmilling.com.

Menene sarƙar ƙarfe?

Karfe slag babban abu ne da ake fitarwa a cikin tsarin samar da ƙarfe, galibi yana ƙunshe da oxides na calcium, iron, silicon, magnesium, da ƙaramin adadin aluminum, manganese, phosphorus, da sauransu. Manyan matakan ma'adanai sune mafita masu ƙarfi waɗanda tricalcium silicate, dicalcium silicate, calcium forsterite, calcium magnesium rose pyroxene, calcium ferric aluminate da oxides na silicon, magnesium, iron, manganese da phosphorus. Kuma yana ƙunshe da ƙaramin adadin calcium oxide da ƙarfe na ƙarfe, fluorapatite, da sauransu. Abubuwan da ke cikin slag na ƙarfe sun bambanta sosai dangane da nau'in tanderun ƙarfe, matakin ƙarfe da matakin narkewar kowace tanderu.

Amfani da slag na ƙarfe

1. Karfe mai kauri yana da tauri sosai, juriyar lalacewa da kuma juriyar tsatsa, kuma yana da saman da ba shi da ƙarfi. Ana iya sarrafa shi ta hanyar na'urar niƙa har zuwa kusan 15-25mm kuma a yi amfani da shi maimakon tsakuwa don tsakuwar hanya ta layin jirgin ƙasa, ko kuma a yi amfani da shi a ƙarƙashin hanya.

2. Ana iya yin ƙarfe mai kauri ya zama yumbu da sauran ayyukan fasaha ta hanyar kashe ruwa.

3. Ana iya amfani da slag na ƙarfe a matsayin simintin ƙarfe bayan an ƙara gypsum da sauran kayan haɗin.

4. Ana iya amfani da ƙarfe a cikin gine-gine da sauran masana'antu ta hanyar ƙara shi a cikin bututun ruwa ko tokar tashi don daidaita tubalin, kuma yana iya zama.

 Steel Slag Vertical Mill Production Line, Email: hcmkt@hcmilling.com

Yadda ake sake amfani da sarƙar ƙarfe? - Injin niƙa mai tsaye na ƙarfe

Akwai hanyoyi guda biyu da ake amfani da su wajen sake amfani da ƙarfen da aka yi da ƙarfe. Hanya ɗaya ita ce a sake amfani da shi a matsayin mai narkewar ƙarfe a masana'anta, wanda zai iya maye gurbin dutse mai laushi da kuma dawo da ƙarfe mai yawa da sauran abubuwa masu amfani daga gare shi; wata hanyar kuma ita ce a yi amfani da shi a matsayin kayan gini a kan hanya, kayan gini ko kuma kayan da aka yi amfani da su wajen yin takin zamani a gona.

Injin niƙa mai tsayi na ƙarfeAna buƙatar sarrafa ƙarfe slag zuwa foda mai kyau, injin niƙa na HLM na iya samar da fineness na 75-44μm, sanannen abu neinjin niƙa mai tsaye na ƙarfe wanda ake amfani da shi sosai a duk faɗin duniya.

Bayani dalla-dalla na injin niƙa na ƙarfe

Masana'antar foda na ƙarfe - HLM Vertical Niƙa

Kayan aiki: ƙarfe slag

Danshin slag: <15%

Yankin saman ma'adinai na musamman: ≥420㎡/kg

Danshin samfur: ≤1%

Ƙarfin aiki: 23-220t/h

Ƙarfin Mota: 900-6700kw

Fa'idodin injin niƙa na ƙarfe mai tsayi: ƙarancin amfani da wutar lantarki, ingantaccen niƙa mai yawa, girman ƙwayar ciyarwa, ƙarancin sararin bene, ƙarancin hayaniya, ƙarancin ƙura, sauƙin amfani da kulawa, ƙarancin farashi, ƙarancin jarin jari. da sauransu.

Ina zan sayi injin niƙa mai tsaye na ƙarfe?

HCM sanannen kamfani nelayin samar da slag na ƙarfeMuna samar da injin niƙa na Raymond, injin niƙa mai tsaye, injin niƙa mai ƙarfi wanda ke sarrafa fineness tsakanin 60-2500mesh. Kayan da suka dace da ke rufe dutse mai laushi, marmara, bentonite, barite, talc, mica, da sauransu.

Idan kana buƙatainjin niƙa mai tsaye na ƙarfeko wasu nau'ikan injin niƙa, don Allah a gaya mana waɗannan don mu iya samar muku da mafi kyawun samfurin injin niƙa.

1. Kayan da aka sarrafa.

2. Ana buƙatar daidaito (raga) da yawan amfanin ƙasa (t/h) da kuma

Email: hcmkt@hcmilling.com