Ana yin foda na quartz da quartz ta hanyar niƙawa, niƙawa, flotation, tsarkakewa daga danshi, tsaftace ruwa mai tsafta da sauran hanyoyin sarrafawa da yawa. Foda na quartz tare da halayen kyawawan halayen dielectric, yawan zafin jiki mai yawa, da kuma kyakkyawan aikin dakatarwa. Ana iya amfani da shi a cikin rufi, robobi, lantarki da na'urorin lantarki.

An ƙarfafa HCQ niƙa ma'adiniAna amfani da shi sosai wajen sarrafa foda na quartz, yana iya yin kyalli na raga 80-400. Wannan injin niƙa wani ci gaba ne na injin niƙa na Raymond da aka tabbatar, yana da yawan amfani kuma ya dace da sarrafa kayan laushi zuwa foda mai laushi.

Injin Niƙa Mai Ƙarfafa HCQ

Matsakaicin girman ciyarwa: 20-25mm

Ƙarfin aiki: 1.5-13t/h

Inganci: 0.18-0.038mm (raga 80-400)

Yaya haka? injin niƙa ma'adiniaiki?

Mataki na farko: Ana jigilar manyan gutsuttsuran quartz zuwa ma'ajiyar kayan da aka sarrafa sannan a aika su zuwa injin niƙa muƙamuƙi ta hanyar amfani da forklifts ko kuma da hannu don niƙawa, sannan a niƙa su gwargwadon girman abincin da aka ci.

Mataki na biyu: ana ɗaga quartz ɗin da aka niƙa ta hanyar lif zuwa wurin ajiyar kaya, sannan mai ciyarwa ya aika shi zuwa babban injin niƙa daidai gwargwado.

Mataki na uku: ana tantance foda masu cancanta ta hanyar tsarin tantancewa sannan a shiga cikin mai tattarawa ta hanyar bututun, ana tattara su kuma ana fitar da su ta hanyar bawul ɗin fitarwa a matsayin samfurin da aka gama. Kayayyakin da ba su cancanta ba suna faɗawa cikin babban injin don sake niƙawa.

Mataki na huɗu: kwararar iska bayan tsarkake samfurin da aka gama tana kwarara zuwa cikin na'urar hura iska ta hanyar bututun iska da ke sama da mai tara ƙura. Hanyar iska tana zagayawa, sai dai matsin lamba mai kyau daga na'urar hura iska zuwa ɗakin niƙa, kwararar iska a cikin sauran bututun yana gudana ƙarƙashin matsin lamba mara kyau.

Idan kana buƙata masana'antar niƙaDon yin foda na quartz ko wasu foda na ma'adinai marasa ƙarfe, da fatan za a tuntuɓe mu don ƙarin bayani, za mu ba ku samfurin niƙa mafi kyau bisa ga buƙatunku.